|
| |
The jig aligned everything flawlessly except for the barrel hole. I should have bought the 2 piece BHL This blank is ruined unfortunately. As a Master Mechanic I’m sure I followed the instructions just fine. Don’t use the BHL on this Jig! |
| |
Reviewed by: Brendan McGarry from PA .
on 11/20/2023
2/5 |
|
 |
| |
Top quality design and construction. Works exactly as advertised. Speed of shipping was amazing. |
| |
Reviewed by: Steven Harper from Newport.
on 3/28/2021
5/5 |
|
|
| |
This jig is very nice but it confused me a bit at first. This will do nicely to set it up and drill your receiver. That being said, I do have a suggestion: There is a guy selling a 3D printed box enclosure that you put your receiver inside to drill through steel bushings but he wants $295 for it, which is insane. My suggestion is that a similar part could be made of aluminum. I plan on using mine as a locator to mark with transfer punches. I expect it should last me a lifetime being made of aluminum if I'm careful. |
| |
Reviewed by: Jim from Pennsylvania.
on 2/24/2021
5/5 |
|
|
| |
Simple design and very affordable to get the work done. I have seen others priced at almost $300 to perform the same function! |
| |
Reviewed by: Dennis from Northern Maine.
on 2/18/2021
5/5 |
|
|
| |
I can't believe how Select Fire can sell this fixture for such a low price!
It is very precise and easy to use.
Well Done Select Fire!
Ken A |
| |
Reviewed by: Kenneth Austin from FL.
on 2/9/2021
5/5 |
|
|
| |
Awesome product very well made nice machining dead accurate A++++ |
| |
Reviewed by: Troy Cosentino from Las Vegas.
on 12/21/2020
5/5 |
|
|
| |
Great tool worked great just go slow and double check fitment |
| |
Reviewed by: Myers from Leesville.
on 11/17/2020
5/5 |
|
|
| |
Fixture is of a high quality, simple design. Instructions with pictures would be very helpful, but watching the video of it being used clears up most questions. |
| |
Reviewed by: RJ from America.
on 10/18/2020
5/5 |
|
|
| |
Worked, a little difficult to keep in place, but functioned ok.si |
| |
Reviewed by: ted beers from Otego .
on 6/23/2020
5/5 |
|
|
| |
Nice piece of equipment is a no fail safe product. easy to use and aplly. thank you . |
| |
Reviewed by: William Gonzalez-Colon from PONCE Puerto Rico.
on 3/28/2020
5/5 |
|
|
| |
Seems well made and should do the job just fine... |
| |
Reviewed by: Robin Ungar from Michigan.
on 9/22/2019
5/5 |
|
|
| |
Execllent quality! Fits and works just like the video shows. |
| |
Reviewed by: Stephen Pennington from Nickelsville Va.
on 1/8/2019
5/5 |
|
|
| |
with this jig you do have to take your time and check a few times before you drill, you have to clamp this on the peace if you can, use this on a drill press and it works, might not be the nicest jig but it does the job. |
| |
Reviewed by: David fultonberger from Maryland.
on 12/30/2018
5/5 |
|
|
| |
If you're not a machinist, this layout tool is vital. What worked best for me
was to use the the jig to transfer the drill points to the receiver using the actual final size bit. Put the drill into the jig hole and create a small dimple by turning the bit by hand, once satisfied that the mark is
properly located, center punch and again verify center with the alignment jig. Drill using incremental bits until the final size. You can't go wrong. |
| |
Reviewed by: MJ from California .
on 5/11/2018
5/5 |
|
|
| |
Easy to use and accurate. Great buy for the money!!! |
| |
Reviewed by: Patrick Hayes from California.
on 3/1/2018
5/5 |
|
|
| |
Awesome jig. Easy to use and with the proper tools. Can be reused until you wear out the holes. |
| |
Reviewed by: Abraham Taketa from Hawaii.
on 12/18/2015
5/5 |
|
|
| |
Great jig for locating and drilling all holes except for the barrel hole. It is too hard to get the barrel hole marked because the barrel hole locator is on the end of the fixture and tends to move out of place when trying to clamp it in place. Buy the separate barrel hole locator for a precise hole. |
| |
Reviewed by: jerome stahl from midwest city, oklahoma.
on 10/18/2015
5/5 |
|
|
| |
Easy to use perfect for what i needed fast shipping as well |
| |
Reviewed by: Shane from Tx.
on 6/29/2015
5/5 |
|
|
| |
nice unit works great!! |
| |
Reviewed by: mike from silverdale.
on 4/27/2015
5/5 |
|
|
| |
This jig works great, I was expecting not as good quality but its perfectly great. Thank you |
| |
Reviewed by: craig from indiana.
on 3/26/2015
5/5 |
|
|
| |
The jig arrived astonishingly fast. The craftsmanship is great, and I feel the price was more than fair for the quality of the product. |
| |
Reviewed by: Brian Sandoval from Elk Grove California.
on 12/5/2014
5/5 |
|
|
| |
this makes this much easier |
| |
Reviewed by: jim from mn.
on 12/5/2014
5/5 |
|
|
| |
I purchased this with my build parts and the drill fixture put all the holes spot on.....Thanks...... |
| |
Reviewed by: Stan from Indiana.
on 8/31/2014
5/5 |
|
|
| |
The razor jig is everything it is promised to be. I used transfer punches to mark the receiver instead of clamping and drilling through the holes. This will give me many more uses of the jig before wearing it out. Of course, I still need to buy the parts needs for assembly before I can declare success, but if the instructions are followed carefully, all should be fine. |
| |
Reviewed by: Donald from CA.
on 5/19/2014
4/5 |
|
|
| |
This fixture is adequate to do the job intended but if you want to use it to complete more than one 80% receiver don't use it as a drill guide, use it as a transfer punch guide only. The positioning pin design is very difficult to clamp when locating the v-block holes and the take down screw hole but was fine for everything else. It's a cheap disposable alternative to the much more expensive and elaborate fixtures on the market costing 5 times what this one cost. There were no instructions or illustrations for the use of the fixture with my kit only some very vague procedural instructions so watch the videos, links are available on the Select Fire Site. |
| |
Reviewed by: B. Shelby from California.
on 5/3/2014
4/5 |
|
|
| |
This makes completing an 80% receiver a piece of cake. Well engineered tool. |
| |
Reviewed by: Michael McAloon from Northern California.
on 4/26/2014
5/5 |
|
|
| |
This is an excellent company. Good sturdy product designed to last. I was even impressed with the super fast shipping. I will recomend this company to any one that meet. |
| |
Reviewed by: Ryan from pennsylvania.
on 4/17/2014
5/5 |
|
|
| |
the jig works great .a must have for this project,and a very good bargin at this price. |
| |
Reviewed by: martin hill from center tx.
on 3/25/2014
5/5 |
|
|
| |
Works good though I would prefer a shelf stop on the jig instead of so many pins. V block holes could also be much easier to align with a shelf stop or separate "slip over" jig. It's very difficult to clamp the v block jig pins onto the receiver in a stable manor. I am making my own vblock jig for my next 80. Dimensions and barrel hole locater are perfect and it is very compact! |
| |
Reviewed by: Mike from Virginia.
on 3/21/2014
4/5 |
|
|
| |
Jig worked great. Really made finishing the 80% easy. |
| |
Reviewed by: Levi from CT.
on 1/11/2014
5/5 |
|
|
| |
I have not used this item yet but I have fit it up to the receiver and it fits perfectly with no slop. It looks to me that it will work exactly the way it is shown in the video. Quality machined part. |
| |
Reviewed by: Jan Bateux from Hayward, CA.
on 1/1/2014
5/5 |
|
|
| |
I have yet to use this tool, but am impressed with the simplicity and soundness of it's design. Great price and it follows the KISS principle to perfection.
I have no doubt it will work just fine. |
| |
Reviewed by: William Starling from Burgaw NC.
on 12/30/2013
5/5 |
|
|
| |
great price a lot cheaper then buying another receiver, easy to use i used it on a different companies receiver and worked great. thinking i might get one of the razor receivers , since the quality and workmanship were great on the jig i am sure the other components will be the same or better. 1 last note fast shipping , good product and good prices sounds like a place i will buy from again. |
| |
Reviewed by: James Garding from Wenatchee, Washington.
on 11/11/2013
5/5 |
|
|
| |
Easy to use to mark all the holes. We used a transfer punch to layoff all holes. Saved the template for another receiver. No problems |
| |
Reviewed by: Keith Williams from Ohio.
on 10/25/2013
5/5 |
|
|
| |
the fixture for razor receiver is excelent, everything in good condition and fast shipment thanks. |
| |
Reviewed by: Roberto C Gonzalez from chicago il.
on 10/7/2013
5/5 |
|
|
| |
Nice tight fit. If your going to do more than a couple I would recommend using a transfer punch and then drill without the jig otherwise I would think you would lose accuracy. |
| |
Reviewed by: Neil Gause from US.
on 8/19/2013
5/5 |
|
|
| |
everything seems to be fine with this until after I drilled the barrel roll in the receiver then realized that the whole to locate the barrel on this Jig was off not by much but enough 2 rune the receiver |
| |
Reviewed by: b from mo.
on 7/16/2013
5/5 |
|
|
| |
I'm completely satisfied with jig. It helped me finish reciever in about an hour. Can't wait to take it to the range. I have a mill and large assortment of bits, so didnt need to purchase the drill bits and tap from here. All I can say is its was very easy to use jig and my new rifle looks great. |
| |
Reviewed by: Mike F. from California .
on 7/13/2013
5/5 |
|
|
| |
Very well built, easy to use, works perfect, and a must have if you want perfect alignment, and fitment. This fixture can be used indefinitely if you use it with transfer punches instead of using it as a drill bit guide. |
| |
Reviewed by: Ray Caniglia from Fresno, California.
on 6/22/2013
5/5 |
|
|
| |
Again a simple yet extremely useful tool when building a razor receiver. |
| |
Reviewed by: frank from colorado springs.
on 6/4/2013
5/5 |
|
|
| |
Got this and it is VERY useful, the instructions leave a lot to be desire but there are videos on the Net that show the use. Made the manufacture process fast and easy for hole alignment. |
| |
Reviewed by: Rick T from New Mexico.
on 5/31/2013
4/5 |
|
|
| |
This jig made things much easier to drill. I am so glad I didn't have to layout all the holes. I am very glad I got the jig. If you are going to do one of the 80% you need to get the jig. |
| |
Reviewed by: I Shooter from Indiana.
on 5/6/2013
5/5 |
|
|
| |
Must have to complete your razor. Recommended. |
| |
Reviewed by: vinnie from cCalifornia.
on 4/19/2013
5/5 |
|
|
| |
works FANTASTIC!!!!!! But be very careful drilling barrel hole. Also a dremel tool and a drill press can be invaluable. |
| |
Reviewed by: thomas turner from kentucy.
on 4/12/2013
5/5 |
|
|
| |
This is a very rugged, and sturdy template. Very well put together.
The service is also very high quality. Promt processing, communication, and with in 2 days of reciving my tracking number It was right in my mail box. These folks will go avove and beyond in their service to future costomers, myself being included in the future customer catagory. |
| |
Reviewed by: Donna Russell from USA!.
on 4/10/2013
5/5 |
|
|
| |
the template was excelent the drills not so much. I bought high quality bits and everything turned out perfect. the use of a dremel to remove small inside burrs and make small tweeks gives you a fantastic receiver when done. Like I said the template was excelent. |
| |
Reviewed by: frederick from kentland.
on 4/8/2013
4/5 |
|
|
| |
The quality of this item can't be faulted. The written instructions are sparse but the tutorial on You Tube more than makes up for them. I can't imagine try to finish a Razor without one of these gadgets! |
| |
Reviewed by: Duane from Curtis Bay, Maryland.
on 4/2/2013
4/5 |
|
|
| |
This is an indispensable precise tool for building your razor receiver. Finding hole locations are quick and easy, but following the build instructions of making sure that everything is square is by far the most important thing to do before beginning. |
| |
Reviewed by: Ed Shires from Wilmington, NC.
on 3/29/2013
5/5 |
|
|
| |
This is a great jig and easy to use. i will be recommending this jig for 10/22 in the future. |
| |
Reviewed by: J Winter from J , San Diego , California.
on 3/29/2013
5/5 |
|
|
| |
Top notch! This is one of the best built jigs I've ever worked with. It is built of very high quality material and puts the holes EXACTLY where they should be. A pleasure to work with. The people at Select Fire are great to work with and I received my order in just a couple days. If you need anything these guys sell, don't just sit there. |
| |
Reviewed by: Steve Nesrsta from San Antonio, Texas.
on 3/27/2013
5/5 |
|
|
| |
Great product Phill. Highly recommend to all the ppls out there that would like a challenge to customize your own 10/22LR. You will need the complete Razor kits to assemble your own 10/22LR. The most challenge thing is to find megazine for your Razor. Thanks Phill. Your product is awesome. |
| |
Reviewed by: vinnie from California.
on 3/25/2013
5/5 |
|
|
| |
Extremely well made. Wish I new how to do this level of work. Thank You |
| |
Reviewed by: Jimmy Moore from Tyler, Texas.
on 3/25/2013
5/5 |
|
|
| |
The Drill Fixture really simplified locating the proper locations for the completion of the Receiver. I'm very happy I chose to buy it. |
| |
Reviewed by: Richard from SanDiego County.
on 3/25/2013
5/5 |
|
|
| |
This is a great fixture and after using it once you will want to build several more receivers!! Just take extra care when setting up your barrel port and first hole and you will be fine. |
| |
Reviewed by: Alan FitzGerald from Norfolk, VA.
on 3/25/2013
5/5 |
|
|
| |
This was perfect, put it in place and made sure it was lined up. Holes all lined up when done. Now I just wish I had ordered more receivers. |
| |
Reviewed by: Jeff from Texas.
on 3/25/2013
5/5 |
|
|
| |
this worked great! I was able to use transfer bushings and a # 30 bit to pilot most of my holes then stepped them up by hand to full-size, it might be worth looking into a step drill kit with a final ream in the future for a more precise finish on the holes. i am able to reuse the jig with the transfer bushings as many times as i need now. |
| |
Reviewed by: moya from lancaster ca.
on 3/24/2013
5/5 |
|
|
| |
I used it to build two Razors and plan on building more........... |
| |
Reviewed by: Old Sarge from Croydon, PA ---USA.
on 2/27/2013
5/5 |
|
|
| |
This makes building the receiver just as easy as it seems on the video. It took me about an hour to drill the holes and tap the ones that get tapped. I would recommend this tool. |
| |
Reviewed by: Michael from Portsmouth, VA.
on 11/12/2012
5/5 |
|
|
| |
I waited way too long to buy this. Item was very well made and I have no doubts that with reasonable care it can be used many times over! I have built a few kit guns so far, the last being a 1919A4 and that was quite a pain. This is very simple and well worth the money!!!!!!! |
| |
Reviewed by: Joel Greer from California.
on 12/9/2011
5/5 |
|
|
